Installing a blanket flat roof
Ceilings
The process of installing a blanket flat roof is very simple and it can be done by anyone. You should consider installing a blanket or batt insulation is you have an exposed ceiling below a flat roof. The heat transfer will be decreased and it will help you save money on energy. Tools and Materials Blanket insulation Utility knife Straight edge ...

Installing a blown flat roof insulation
Ceilings
This process may seem a little complicated, but with the right tools it will be more simple than you think. You will need a few tools, but fortunately these can be found at your local improvement store. They can also be rented. Tools and Materials Needed Blown insulation Insulation blower Spackle Spackling knife Expanding foam sealer Drill ...

How to soundproof a room with suspended ceiling
Ceilings
Many users have the idea that suspended ceilings cannot be soundproofed. This is quite wrong because they actually offer more opportunities than normal ceilings. It is more than easy to isolate your room from outside noises. Materials and Tools Needed Flexible sealant Soundproofing material: mineral wool or heavy vinyl barrier Hanging wire, if you a ...

About tin ceilings
Ceilings
Tin tiles are actually made from an aluminium alloy. The main advantage is that tin is very resistant to corrosion and very durable. It makes a great investment for your home. Panel wight/sized differences Tin ceiling panels are smaller then plaster ones. They are also very light and can be lifted by anyone. This makes them also very easy to install. C ...

How to paint a tin ceiling
Ceilings
It's more than easy to paint aluminium ceilings, because they come already painted with a layer of primer. They actually are prepared for painting before you buy them. Another advantage is that you can paint them before you install them. This way you save yourself a backache. Sometimes they don't even need painting because or their ornaments. The shadows cre ...

How to plan and install tin ceiling tiles
Ceilings
The way tin tiles are installed had evolved through the years. It has reached the point where you don't need a professional to install them for you, but you can do the job all by yourself. There are now unique interlocking systems that reduce the time needed to install them but also the tools. Tin tiles can be installed on every type of ceiling, even on d ...

How to install a tin ceiling
Ceilings
Attaching the panels to the ceiling The easiest way to install tin panels it to first install a ply on the old ceiling. You can also use timber battens but building a ply is easier. You don't need to worry much about the installation as most suppliers and manufacturers will give you direct instructions for the fitting. If you are lucky and you have tim ...

Fixing acoustic tiles
Ceilings
They only thing you can do about broken or fallen tiles is replacing them. To avoid these kind of incidents, be sure to verify each tile once in a while to see if it's fixed properly. Tools and Materials Needed Replacement Acoustic Ceiling Tile Ladder Flashlight Utility Knife Locating the damaged tile If it's cracked, chipped or just loosen, ...

Installing faux wood beams on a cathedral ceiling
Ceilings
Every cathedral ceiling looks better if it has wood beams, even if they are faux. They are very easy to install and they can be made from polyurethane, wood laminate or stainable wood. Tools and Materials Needed Wooden blocks Tape measure Painters tape Electric screwdriver Caulking gun Handsaw Wood filter chalk line Stud finder Drywall ...

Dealing with low ceilings
Ceilings
If you feel trapped in your own room because of the low ceiling, maybe it's time do to something about it. There are a few things that you can do to make your room seem taller. First of all, if your ceiling has a chair rail, you should remove it. It makes your ceiling look even lower than it is. Although on higher ceiling it looks good, on lower ceilings ...