|
|
|
|
 |
If you roof verge got damaged or worn, then you should make a quick inspection and see if there are any leak problems. If this problem is left unattested the damage can spread to other parts and it can cause even more serious problems. Roof maintenance is very important. Some of the tools and materials that you will need for the job are:
Materials It’s better to inspect the roof and then go buy the necessary materials. This will help you buy the right amount of materials. Also this will tell you what kind of materials you will need. Cleaning Get on the roof and remove all the debris and dust from the roof verge. Use a wire brush and remove any traces of dirt. Also remove damaged mortar and loose and worn roofing material. Preparing the surface Replace worn out tiles and make sure that the entire area is covered. Wipe of debris with a brush. Wet the surface with some clean water. Mortar Mix 3 parts sand with one part cement. Pour 2 gallons of clean water and mix it thoroughly. You can pour another gallon of water. The mortar needs to be smooth and consistent. Applying the mortar Scoop some mortar in a bucket and apply the mortar using a trowel and a mortar board. Butter and smooth the mortar using the trowel and make sure that it’s leveled. Apply the mortar to the entire surface. Inspection Leave the mortar to dry. Look for cracks or inconsistencies on the surface. |
|
Didn't find what you were looking for ? Try our search !
| ||
|
|
Home
Categories
Contact us Tech Puma DIY Start DIY Explore Body Health Book Catalog Auto Samsung Update |
|
