Installing a gas central heating system

It’s important that you have a central heating system to warm up your house in the cold winter months. Installing a central heating system can be quite complicated and will require you to have some special skills. The process is also time consuming, so think ahead of time.

Some of the tools and materials that you will need are:

  • Screwdriver
  • Wrench
  • Plastic Base
  • Hole Filler
  • Duct Tubing
  • Central Heating Unit
  • Thermostat

Duct work installation

It’s very important that you plan everything before you build anything. Plan out your duct configuration in order to make the installation process easier and also to prevent any mistake. Also make sure that there is enough space in each room to install the ducts. After all this you can start installing the pipes.

Air handler installation

The air handler is the first thing that you should actually install. This component is usually installed in the basement of your home. Make sure that the condenser drain is installed in order to properly allow the water to drain safely.

Outside tubing

Run the tubing from the air handler outside to allow ventilation.


When you are working around electrical wiring, make sure that you turn off the power. This will prevent any accident and short circuits.


Install the thermostat using the instructions provided by the manufacturer. Place it on a wall in one of your rooms. Attach the thermostat with screws and connect it to the main wiring.

Gas line

Now it’s time to attach the gas line to the heating system. You will need to call a professional to do this for you. After you have installed the gas line, test the unit and light the pilot light.

air handler installation, central heating system, duct work installation, gas central heating system, gas heating system piping, gas line, gas powered heating system, gas powered system, gas system pilot light, heating system, outside tubing, thermostat