Bathtub drain clog removal

Bathtub drains are exposed to the main problems for clogging. These are hair clogs, soap scum and mineral accumulation. You can easily fix these problems all by yourself.

Tools and Materials Needed:

  • Rubber gloves
  • Drain snake
  • Old rags or paper towels
  • Water

Step1. Getting ready

Always protect yourself. The first thing you need to do is buy some latex gloves to protect yourself from detergents. Also, drain snakes are very hard to handle when they get wet and can cut your skin.

Remove any hair traps if you have any installed and then fill the tub with water to see if the problem persists.

Step2. Inserting the drain snake

Hold your drain snake carefully by the end with the crank. Insert the other end into the drain. Be careful that you can very easily scratch the surface of the bathtub. Now turn the crank a few times to get the snake into place.

Step3. Operating the drain snake

Now, after fixing it into the drain, it’s time to extend it so that it can reach the clog and remove it. Turn the crank easily so that you don’t force the snake. If you feel that it is stuck, then it can mean two things: either it’s stuck – then you’ll have to pull it back a little, otherwise if you force it to continue you may damage the pipes, or it has reached the clog.

Step4. Getting rid of the clog

Remove the drain snake and see if there is any dirt on the top of it. If it is then remove it with a paper towel. Then pour some water into the drain. Repeat the steps until you remove it completely.

bathroom tub drain clog, bathtub clog, bathtub drain clog, clog, drain, drain clog, drain snake, handling drain snake, how to use a drain snake, remove drain clog, remove sink clog, removing bathtub clog, tub clog, tub drain, tub drain clog