Extra stability for the willow fence

The necessary material for a rustic fence can be found very easily in tree stumps or in places like ditches. This type of material has been used for a long time for making roofs, walls or fences for containing animals. A willow or sampling fences has zero costs and can give your garden an old-world ambiance.


  1. Sampling branches can be either cut from trees or gathered from the sides of the roads. If you prefer something else than willow, you can use oak or pecan which work the same.
  2. It’s better to let at least 12 inches extra for the posts than the height you have anticipated. For the posts you can use saplings gathered from the yard or even the woods.
  3. In order to place the posts into the ground, you have to sharpen their end with a hatchet.
  4. The posts should be buried underground about 12 inches deep and should be at a distance of 14 inches. If you reach hard soil, use a rebar or any other strong material to make guide holes.
  5. The bendable branches should be weaving in and out of the posts. The weave of a row should start from the side of the post that is opposite to the previous row. The alternation should also exist between the base ends and the tip ends.
  6. Once the branches have been woven, they should be pushed down to the fence.
  7. After the work is done, use lopper pruners to get rid of any long ends.


  • Weave hemp string through all the ends to tighten the weave for more stability.
  • You can protect the seeds when germinating by making roll-up mats from the trimmed twigs. All you have to do is to tie the twigs together using hemp string.
bury the fence posts, costs for the willow fence, extra stability for the willow fence, fence, finding sampling branches for the willow fence, instructions for making a willow fence, making a willow fence, saplings for the fence posts, willow fence, zero costs for willow fences