Insulation Attic

Although blown fiberglass can be a little difficult to install, it is less expensive then other types of insulation and it is also very efficient. You need to be very careful with the installation, though. If it isn’t made properly, the effectiveness won’t be the same.

Always take safety precautions when working with fiberglass. Wear goggles, mask and gloves. Also make sure that the area is well ventilated.

Tools and Materials

• Cellulose insulation
• Cellulose blower
• Tape measure
• Metal flashing
• Rulers
• Cardboard
• Long sleeves
• Long pants
• Safety Eyeglass
• Mask
• Hat or Cap
• Gloves

Measurements

Measure the area that needs to be insulated. Determine the square footage of your attic. This will help you buy the right amount of insulation.

Covering the attic access and blocking light fixtures

Cover the access hatch with a cardboard. Fix it with adhesive and tape.

The light fixtures need to be blocked using a metal flashing. Leave a space between the flashing and the light fixtures of at least 3 inches. The metal flashing keep s the fiberglass away from the wiring.

Installation

First of all make sure that you are wearing protective equipment, like long sleeves, long pants, goggles, dust mask, gloves. Install a few rulers in different places to make sure that the fiberglass layer is high enough.

Now, for the installation, you will need to feed the blower with insulation. Hold the hose parallel to the floor and then start the machine. Start spreading the insulation from a distant corner and then make your way to the access hatch. Check the depth of the insulation.

Be careful not to cover the vents. If you did so, use a putty knife to remove the insulation. Do not let the content of the hopper fall below the minimum requirements.

Tag: adding blown insulation, attic blown fiberglass insulation, attic insulation, blown cellulose, blown cellulose insulation, blown fiberglass insulation, blown insulation, blown insulation installation, home insulation, home insulation tips, insulation, protective gear for blown insulation, saving money on energy

Read more from Attic Installing an attic vapor barrier Vapor barriers are an excellent addition to your attic insulation, as it will help keep damaging agents away from the insulation. Tools and Materials Needed Foil or plastic sheeting Caulk ... The advantages of using reflective attic insulation Reflective insulation, like radiant heat barriers, provide many advantages. They help keep the warm temperature in your house in the winter months, and also keep the cool air inside, in the summer ... Installing attic insulation for cold climates Most of the heat in your house will rise in the attic. As long as this heat is retained in the attic, your house will keep warm. You will need to insulate your attic in order to achieve this. It i ... Blown fiberglass installation Although blown fiberglass can be a little difficult to install, it is less expensive then other types of insulation and it is also very efficient. You need to be very careful with the installation ...

Foam attic insulation on a budget Attic Blown fiberglass installation Attic Adding insulation to your attic Attic Installing attic insulation for cold climates Attic Insulating attic flooring Attic Radiant heat barrier costs Attic How to insulate an attic hitch Attic Attic floors insulation Attic Attic insulation Attic Insulating attic stairs Attic