Repairing a roof verge

If you roof verge got damaged or worn, then you should make a quick inspection and see if there are any leak problems. If this problem is left unattested the damage can spread to other parts and it can cause even more serious problems. Roof maintenance is very important.

Some of the tools and materials that you will need for the job are:

  • Cold chisel
  • Club hammer
  • Spade
  • Beach sand
  • Cement
  • Water
  • Trowel
  • Motor boar
  • Wheelbarrow
  • Gallon
  • Protective overalls
  • Working gloves
  • Eye goggles
  • Ladder
  • Stiff brush
  • Mortar


It’s better to inspect the roof and then go buy the necessary materials. This will help you buy the right amount of materials. Also this will tell you what kind of materials you will need.


Get on the roof and remove all the debris and dust from the roof verge. Use a wire brush and remove any traces of dirt. Also remove damaged mortar and loose and worn roofing material.

Preparing the surface

Replace worn out tiles and make sure that the entire area is covered. Wipe of debris with a brush. Wet the surface with some clean water.


Mix 3 parts sand with one part cement. Pour 2 gallons of clean water and mix it thoroughly. You can pour another gallon of water. The mortar needs to be smooth and consistent.

Applying the mortar

Scoop some mortar in a bucket and apply the mortar using a trowel and a mortar board. Butter and smooth the mortar using the trowel and make sure that it’s leveled. Apply the mortar to the entire surface.


Leave the mortar to dry. Look for cracks or inconsistencies on the surface.

how to repair a roof verge, mortar for roof, mortar for roof verge, repair roof verge, roof, roof inspection, roof maintenance, roof repairs, roof verge, roofing, verge