Measure the fence posts and the fence
With the help of the following steps, installing wood fence panels can be a pretty easy task to accomplish.
The necessary tools and materials
- Safety glasses
- Measuring tape
- A partner
Before you begin you have to be sure you have all you need for fixing the wood panels. Check all the fence posts and see if they’re all sturdy.
Regarding the panels, you need to match them up together with the fence and posts, which have been already installed in your yard. A solution to solve this problem is to take a post with you when you shop for the wooden panels. To know exactly what you have to buy, you should first measure the fence posts and fence installed. This way you can make a pretty good idea about the size of the panels and their number.
The entire process will go a lot faster if you have someone to help you. Your partner can keep the panels evenly and with a level you can verify if they are straight. Many professionals use a stand,at the installation of the panels, that will be put under each and every panel. Through this method, they make sure that in the end there is the same space between the panels and the ground. There is nothing wrong in using only the stand but with the level you can verify better. It’s important to pay attention at the space alternating between the posts and the panels. When everything is in order, you can start fastening the panels by the wood on the posts using a drill. It’s better to start with only one side of the fence and after you have set the first panel, then you can guide the others based on this one.
A layer of stain will be very helpful, especially if the fence is in an area with rain and snow. This way you can be sure that your wooden fence will not rot or fall down.